ZTE 10G 1310nm SM 1.4km I-temp SFP+ Module LTF1303-BH+ MTRS-1E21-01 EOLP-1396-02-I

Brand: ZTE
Part Number: 033030100337
Condition: Factory New Sealed
Availability: In Stock
Shipping: Fast Shipping Across Canada
Delivery: Typically within 2 Business Days
Warranty: 3 Years

C$ 28.08

Qty

0 reviews Write a review

The ZTE 033030100337 is a high performance, cost effective modules, which is supporting Multi Rate 4.9152.Gbps to 10.3125Gbps, and transmission distance up to 1.4km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a laser driver and a 1310nm FP laser. The receiver section consists of a PIN photodiode integrated with a transimpedance preamplifier (TIA) and a Limitting Amplifier. The module is hot pluggable into the 20-pin connector. The high-speed electrical interface is base on low voltage logic, with nominal 100Ohms differential impedance and AC coupled in the module.

The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Transmit Fault (Tx_Fault) is provided to indicate that the module transmitter has detected a fault condition related to laser operation or safety. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver. A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the 2-wire SFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic (DD) data is held in the lower area while specific data is held in a series of tables in the high memory area.

Features

Up to1.4km transmission on SMF
Support Multi Rate 4.9152Gbps to10.3125Gbps
1310nm FP laser and PIN receiver
SFI electrical interface
2-wire interface for integrated Digital Diagnostic monitoring
SFP+ MSA package with duplex LC connector
Hot pluggable
Very low EMI and excellent ESD protection
+3.3V power supply
Power consumption less than 1.0W
Operating case temperature: -40~+85°C

Applications

High-speed storage area networks
Computer cluster cross-connect
Custom high-speed data pipes
LTE optical repeater application

Compliance

Compliant with IEEE 802.3ae-2002
Compliant with MSA SFF-8472
Compliant with MSA SFF-8431

Specifications

Part Number: 033030100337
MPN: LTF1303-BH+, MTRS-1E21-01, EOLP-1396-02-I
Pack: SFP+
Rate: 4.9152Gbps to10.3125Gbps
Tx: 1310nm FP
Pout: -8.2 ~ 0.5dBm
Rx: PIN
Psens: <-14.4dBm
Reach: 1.4km
Operating Temperature: -40~+85°C

033030100337

This 033030100337 is 100% genuine ZTE product. It won't have any compatibility problem with your ZTE devices. And the ZTE 10G 1310nm SM 1.4km I-temp SFP+ Module LTF1303-BH+ MTRS-1E21-01 EOLP-1396-02-I is factory new with original packaging. Buy it now and enjoy risk free purchase with fast worldwide delivery from GenuineModules.com

Optical Transceiver Specifications
Product Type	Optical Transceiver
Form Factor	SFP+
Data Rate	10Gbps
Network Standard	Ethernet
Wavelength	1310nm
Fiber Type	Single Mode Fiber (SMF)
Connector Type	LC Duplex
Transceiver Type	Optical
Transmitter Type	FP Laser
Receiver Type	PIN
DDM Support	Yes
Hot Swappable	Yes
Brand	ZTE
Application	5G Network